The Electronic Machines


AJH6
LMS6n
IJR4

Project 2- Weather Vein

  • step-1 you will need 2 straws,1cd,2 large paper clips, Tape, duct and scotch,card stock
,2 nails,hot glue gun,scissors
external image 17460273250_93a52abee6_n.jpg
  • step 2- cut a triangle piece of card stock
    external image 17461579609_1c73669bdf_n.jpg
  • step 3- cut a opening at the end of the straw

  • external image 17461565189_133c3417ff_n.jpg
  • step 4- put the opening at the point of the card stock
    external image 17461579609_1c73669bdf_n.jpg
  • step-5 bend paperclip as shown
    external image 17645508582_b0ca296b5c_n.jpg
  • step 6-slip the paperclip in the other side of the straw
    external image 17460378680_1e9e6a529e_n.jpg
  • step 7-find the middle of the straw and poke a nail through the straw
    external image 17621651506_e20d6b5154_n.jpg
  • step 8- make one end of the paperclip and put it though the tape and stick it on the cd
  • step 9-Make sure that
    the straightened paperclip thatpokes through the CD is perpendicular to theCD. Stick a straw on top of the straightenedpaperclip. Use a permanent marker to markexternal image 17621668456_3b8f55e209_n.jpg
  • step 10-
    Stick the nail into the standing straw tosupportthe top strawexternal image 17025490124_3c3c5fda4e_n.jpghttps://flic.kr/p/sTuRer

Project 1- Bee Hummer

  • Step 1- Gather your supplies.
    external image 17051048349_ae336ddea9_m.jpg
  • Step 2- Cut your index card in half.
    external image 16617021993_95f6884158_m.jpg
  • Step 3- Put your erasers on both ends of your Popsicle stick.
    external image 17029799007_38c03f0545_m.jpg
  • Step 4- Staple your index card to your Popsicle stick
    external image 17236638341_3b1868b277_m.jpg
  • Step 5- Tie your string on the bottom of your Popsicle stick.
    external image 17095357437_d0b8798f23_m.jpg
  • Step 6- Put your rubber band on both sides of your Popsicle stick.
    external image 17300958862_6a50e2ed2a_m.jpg
  • Step 7- swing your bee hummer around